Archive | Energy Saving Light Bulbs

RSS feed for this section

The Advantages of Low Energy LED Light Bulbs

Advantages of Low Energy LED Light Bulbs

LED light bulbs have many advantages, the manufacturers tell us. So, we decided to compile a list. You can see that list directly below. But, nothing is ever as simple as that, there are always some negative points when a new technology arrives, and although none of them are, in our opinion, “show stoppers” for LED lighting, we thought them worth publicizing here as well. Scroll on down and you will find the LED lighting disadvantages list below the not insignificant list of advantages.

Advantages Include:

Effectiveness- LEDs give off more lumens watt for watt than standard incandescent light bulbs. The performance of LED lighting components is not affected by lamp geometry and dimensions, unlike fluorescent lamps or tubes.

Color– LEDs can send out light of a designated color without utilizing any color filters as conventional lighting approaches require. This is more reliable and can lower preliminary costs.

Size- LEDs can be really small (smaller than 2 mm2) and are easily attached to printed circuit boards.

On/Off time- LEDs illuminate very rapidly. A normal red sign LED will certainly achieve complete brightness in under a microsecond. LEDs made use of in interactions devices can have even faster response times.

For Use When Biking- LEDs are perfect for uses subject to regular on-off biking, unlike incandescent and fluorescent lamps that fail faster when cycled often, or High-intensity discharge lamps (HID lamps) that require a long time prior to restarting.

Dimming- LEDs can very quickly be dimmed either by pulse-width modulation or lowering the forward present. This pulse-width modulation is why LED lights, specifically headlights on vehicles, when seen on camera or by some people, appear to be flashing or flickering. This is a kind of stroboscopic impact.

Cool light- In contrast to most light sources, LEDs radiate hardly any heat in the form of IR that can cause damage to delicate items or fabrics. Wasted energy is dispersed as heat through the base of the LED.

Progressive failure- LEDs primarily fail by the loss of intensity (brightness0 over time, rather than the sudden “click” or flash often heard, or seen, at the moment of failure of incandescent bulbs.

Lifetime- LEDs can have a fairly long helpful life. One guide quotes 35,000 to 50,000 hours of beneficial life, though time to total failure might be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000 to 2,000 hours. Several DOE demonstrations have shown that minimized maintenance costs from this extended lifetime, as opposed to energy cost savings, is the main factor in identifying the payback duration for an LED item.

Shock resistance- LEDs, being solid-state components, are hard to harm with external shock, unlike incandescent and fluorescent bulbs, which are delicate.

Focus- The solid package of the LED can be created to concentrate its light. Incandescent and fluorescent sources commonly need an external reflector to gather light and direct it in a functional way. For bigger LED bundles overall internal reflection (TIR) lenses are frequently utilized to the same result. When large quantities of light are required numerous light sources are usually deployed, which are challenging to concentrate or parallel to the very same target.

Disadvantages

High purchase cost- LEDs are currently more expensive, rate per lumen, on a preliminary capital cost basis, than many traditional lighting innovations. The added cost partly stems from the reasonably low lumen output and the drive circuitry and power materials required.

Temperature level dependence- LED performance largely depends on the ambient temperature of the operating environment, or “thermal management” properties. Over-driving an LED in high ambient temperatures may result in overheating the LED bundle, ultimately resulting in device failure. A sufficient heat sink is had to keep long life. This is particularly crucial in automobile, clinical, and military uses where devices have to run over a vast array of temperatures, which require low failure rates. Toshiba has actually produced LEDs with an operating temperature level range of -40 to 100 ° C, which fits the LEDs for both outdoor and indoor use in applications such as lamps, ceiling lighting, street lights, and floodlights.

Voltage level of sensitivity- LEDs need to be provided with the voltage above the limit and a current below the rating. This can include series resistors or current-regulated power products.

Light quality- Most cool-white LEDs have spectra that differ considerably from a black body radiator like the sun or an incandescent light. The spike at 460 nm and dip at 500 nm can trigger the color of challenge be viewed differently under cool-white LED illumination than sunlight or incandescent sources, due to metamerism, red surfaces being rendered especially severely by normal phosphor-based cool-white LEDs. Nevertheless, the color-rendering homes of typical fluorescent lamps are often inferior to exactly what is now readily available in state-of-art white LEDs.

Location light source- Single LEDs do not approximate a point source of light giving a round light distribution, however rather a lambertian circulation. LEDs are challenging to use to uses requiring a spherical light field; however, various fields of light can be controlled by the application of different optics or “lenses”.

Electrical connection current flow direction- Incandescent light bulbs, work at any direction of flow of current electrical (polarity setting), LEDs are different. They will only illuminate when connected with right electrical polarity.

Safe blue light intensity exceedance risk- There is a concern that blue LEDs and cool-white LEDs are now efficient in going beyond safe limitations of the so-called blue-light danger as specified in eye safety specs such as ANSI/IESNA RP-27.1– 05- Recommended Practice for Photobiological Safety for Lamp and Lamp Systems.

Blue light pollution- Due to the fact that cool-white LEDs with high color temperature send out proportionally more blue light than standard outdoor lights such as high-pressure salt-vapor lamps, the strong wavelength dependence of Rayleigh spreading ways that cool-white LEDs can cause more light pollution than other lights. The International Dark-Sky Association discourages making use of white light sources with associated color temperature above 3,000 K.

Efficiency droop- The luminous effectiveness of LEDs reduces as the electrical current increases. Heating likewise enhances with greater currents which jeopardizes the life time of the LED. These effects put practical limitations on the current through an LED in high power applications.

Influence on bugs in the air- Standard white light LEDs have been shown to be much more attractive to airborne pests than sodium-vapor lights, so much so that there has been speculative issue about the possibility of interruption to the insect ecology. (Special LED lamps for outside use, which provide light visible to the human eye, but not considered to be visible to insects, are now available which remove that concern.)

Don’t be put off buying by these disadvantages though. LED light bulbs are a big improvement on Compact Fluorescent Lamps which have many far more serious drawbacks.

Which Light Bulb is Most Efficient

most efficient LED Light bulbsLED lighting is the light bulb which is most efficient, by a substantial margin. in truth there are higher efficiency LED lamp types which can be purchased, however even the conventional LED bulb is bound to be more efficient than any other non-LED alternative which provides a complete noticeable light spectrum.

When it comes to picking the most efficient light bulb for outdoor and/or indoor use for any particular application, there are different factors that require to be taken into factor to consider. Halogen bulbs are something that may be a great selection for individuals depending upon what they are looking for. Halogen bulbs are brighter are more effective than conventional incandescent bulbs, and come at higher lighting intensities which may be needed to provide outdoor lighting of large areas, and within high ceiling warehouses, for example.

Numerous householders and companies have actually begun making use of LED light bulbs, but there is still a large number of world population that is unaware of the advantages of LED light bulbs. The reason LEDs have not yet displaced CFLs from the market are twofold. First of all, the first generation LED bulbs had a narrow and focused light beam, and they were very costly, so much so that, until recently, the expense of the LED bulbs was simply too high.

LED light bulbs produce only trace quantities of heat, leading to almost all of the electrical energy eaten being made use of toward developing the light itself. Incandescent, halogen or fluorescent lights can use up to 90 % of their energy usage producing heat putting out infrared light photons which do not produce visible light – just useless heat.

As LED light bulbs are becoming popular, they are readily available virtually all over the web and in shops. Simply see a local street market, and you see a plethora of models and designs in high efficiency LED light bulbs. They differ in regards to purchase cost and life-time. You can easily select the one which fits your spending plan and space requirement. You can quickly browse on on-line stores and see if you can get some great offers if you do not have adequate time to go out shopping to a local store.

Due to the fact that of their greater performance compared to the ordinary incandescent bulbs the led light bulbs are more efficient and efficient they likewise save energy because it needs less amount of power to heat up. Led light bulbs likewise produce minimal quantity of heat and it can be used for the growth of indoor plants and the bulbs continue to be cool even when lit.

These LED light bulb replacements can even offers you with great light with only the use of just 3 x AAA batteries, because they are so efficient. Not only that, highly efficient LED light bulb replacement are very lightweight and extremely power reliable and ideal for day-to-day use over long period of time and together with all this, when used as lamps on a helmet for high detail close-up working, they are extremely comfortable to wear too. Whichever design fits your requirement you should get it becsaue teh LED option will be the most efficient, and use the latest innovation in lighting available to you.

You can discover LED light bulbs in a variety of color temperatures. For a kitchen area I would advise a greater color temperature level around 5000K to 6500K (6500K being daylight color) with as high a CRI as is reasonable to acquire. CRI is an acronym for Color Rendering Index, which is a measure of how “true” colors appear under the light of any provided light bulb. As an example, the sun has a CRI of 100, so anything above 80 will represent colors very near the way they show up in natural sunshine.

Fishing, hunting and camping enthusiasts can be confident that with a LED flashlight in their gear, they will have adequate, effective light that will last for days on one set of batteries and years on one light bulb. They will certainly also be excited, or even amazed, to discover this innovation built into a variety of type elements, all specifically designed for particular activities headgear lamps for cave hikers, flexible lights for the fishing fraternity, night lights for campers and long-distance beam torches for hunters.

The invention of the most efficient LED light bulbs was mostly to lower rising electric bills. The light from these bulbs is sent-out from a strong light emitting diode which is otherwise called an SSL or Solid State Lighting. This is instead of a gas or vacuum as in the old incandescent bulbs. Led light bulbs are compatible with other bulb holders, as they can be found in types which will work with most of the old electrical fittings commonly available. They can be made use of for artistic lighting designs, as well as work and home lighting functions, due to the fact that they can be found in various shapes including flashing rope lights, pre-lit Christmas trees, festive garlands etc.

Many people have actually started making use of LED light bulbs, there is still a big number of world population that is unaware of the benefits of LED light bulbs. Led light bulbs also produce minimal quantity of heat and they can be utilized (as special types) for the growth of indoor plants. CRI is an acronym for Color Rendering Index, which is a measure of how “true” colors reveal up under the light of any given light bulb.

Environmentalists Pushing for Massive Vermont Carbon Tax – The Northfield News

Environmentalists Pushing for Massive Vermont Carbon TaxThe Northfield NewsIn case you ever wondered why you can get those energy efficient light bulbs at such huge discounts, it’s because you pay for them through a surcharge on your electric bill. It’s a form of … That makes our data as a rural state even more impressive …

One startup’s big idea to boost the green revolution: lots of small financing (Money)

Jigar Shah, the entrepreneur behind solar powerhouse SunEdison, has a new company called Generate Capital that aims to provide capital for other forms of clean tech.


Image from page 449 of "Hardware merchandising October-December 1910" (1910)

Why OLED lighting will soon shine on you

The flat-panel lighting tech is for sale at Home Depot starting at $200, providing a new energy-efficient alternative to LED lights.

http://ladoma.org/energy-saving-light-bu…

Energy Saving Light Bulbs Dangers

light1Governments and environmental supporters are promoting energy saving compact fluorescent bulbs (CFLs) as a method of lowering electrical energy use, saving money, and minimizing our carbon footprint. CFLs are not an ideal technolog. Apart from that when they are turned on they take a minute to completely brighten, they are a small threat to us all. They contain a percentage of mercury which needs unique treatment for its safe disposal. CFLs are an innovation which is also soon to become outdated and is already ending up being outdated by LED lighting. These more energy reliable lights are coming onto the marketplace. Do not be perturbed, CFLs are a safe and energy effective alternative to incandescent bulbs.

You are most likely to hear conflicting views about the mercury risk, and you’ll discover that damaged bulbs are a problem to clean up if one breaks. If a fluorescent light comes crashing down onto your floor, releasing the mercury caught within, you do not need to panic. Just Google “CFL Mercury clean up”, or comparable, and follow the steps provided to securely get things cleaned up.

Fluorescent lights get their glow from the mercury caught inside, and the compact fluorescents (CFLs) used for energy reliable home lighting are now commonly available various shapes and sizes. Do not be worried that they could poison you, due to the fact that no mercury is released when CFLs are undamaged or in use.

Risks of Mercury

If you are fretting about the risks of mercury. You do not have to participate in the push to change incandescent light bulbs with compact fluorescent bulbs,which are also called CFLs. You can avoid buying CFLs and go directly to much safer and more reliable LED lighting. But, in truth, most of the scare stories about Energy Efficient Bulbs (CFLs) relate to people who have actually gotten incorrect info from hardware establishments, grocery stores and even public health officials, or just not taken sensible care when using them.

It is the white powder coating inside the glass tubing of a CFL which contains the fluorescent mercury covering. When electrical energy goes into a CFL, mercury, argon fumes inside the bulb produce ultraviolet (UV) light which is undetectable to humans. This UV light responds with the fluorescent finish to produce the white, visible light you see when you turn on a CFL.

Government and the lighting industry will continue to work together to minimise the mercury content. A new requirement is being introduced for CFLs that consists of an optimum mercury content aligned with the low European Commission requirement. The regular old non-compact fluorescent tubes in present use, consist of approximately 15 mg per tube of mercury, and these have actually been used safely in a lot of commercial and public buildings all over the world for over 40 years. The short lived character of the possible exposure especially after effective clean-up of smashed CFL products, does not actually in the vast majority of cases constitute a substantial health danger to the exposed adults, including if these are pregnant ladies, or kids.

At present, CFLs can normally be disposed of in routine waste bins in numerous countries, where the rubbish goes to landfill. When garbage will be recycled, it is more vital that old bulbs be independently gathered, in order to protect the workers at the recycling facility. You need to discuss this with your regional authority department liable for trash collection. They will tell you about any special measures for collection of old CFLs. Various regional authorities have various plans and they do differ from place to place.

Summary

Fluorescent lights get their glow from the mercury trapped within, and the compact fluorescents (CFLs) used for energy efficient family lighting are no exceptions. Do not be worried that they may poison you, due to the fact that no mercury is released when CFLs are intact or in use. It is the white powder finishing inside the glass tubing of a CFL that includes the fluorescent mercury finishing. When electrical energy gets in a CFL, mercury and argon fumes inside the bulb produce unnoticeable ultraviolet (UV) light.

Will Energy Skyscrapers Someday Dot the Southwestern Desert? – Triple Pundit (blog)

Will Energy Skyscrapers Someday Dot the Southwestern Desert?Triple Pundit (blog)tower_newtower_pic Sometimes you have to think big. That’s certainly what Dr. Phillip Carlson would say. He’s the guy that invented the “energy skyscraper” back in the ’70s. It was a colossal tower that would reach up into the sky to create what you …and more »


Caritas, Karachi, Pakistan

Keeping Up with the Greens: Neighbors Can Spur Conservation (Op-Ed)

Marlene Cimons writes for Climate Nexus, a nonprofit that aims to tell the climate story in innovative ways that raise awareness of, dispel misinformation about and showcase solutions to climate change and energy issues in the United States. She contributed this article to Live Science’s Expert Voices: Op-Ed & Insights. Mindful of the growing dangers of climate change, I always strive to be an …

http://ladoma.org/energy-saving-light-bu…

LED Energy Saving Light Bulb

The energy conserving type of LED Energy Saving Light Bulb puts off a cool temperature level as a result of the low wattage of power needed. The light offered by the low energy bulb is a white light as compared to a yellow-coloured light offered with a standard bulb.

LED energy saving light bulbs can be taken as a one-time financial investment, as they can last for nearly seventeen years before they need any replacement. Once they are dealt with bought and fitted, you will certainly never ever need to fret for driving to the shop, purchasing bulbs etc. Isn’t it due time that you offer your life a rest!

Another benefit of LED light bulbs arising from the fact that that they do not discharge much heat. Is that, if utilized in multiples really warm up a space, the normal bulbs. That is not the case with LED light bulbs. Changing to LED light bulbs will certainly keep your room cooler.

LED light bulbs are ending up being the selection for for people searching for low energy and reliable lighting, due to their different bulb alternatives, and the ease which the light output can be adjusted and controlled when compared to the old style “energy efficient” CFL bulbs.

Choosing An LED Energy Saving Light Bulb

All LED light bulbs are certainly not the same. The quality of the light can also differ considerably.

LED light bulbs come in a wide variety, with each offering their own set of functions. The ones from big name brand names, such as Phillips and General Electric have the tendency to be more expensive, however could offer more after sales service, including warranty that you can more readily rely upon. For example, the GE ones can be twice as pricey, however carry a guarantee of a minimum of 10 years. Others could only carry a 2 year guarantee, however only be at a lower initial expense, maybe only half as much. This could make many people think that GE is more confident that their LEDs will last longer than the other ones.

LED light bulbs have actually been developed to take over the locations of incandescent light bulbs or halogen light bulbs, since they save energy. Also, remember that their performance is almost double that of normal halogen bulbs and they do not have any harmful compounds used when they were made, such as mercury. The sturdiness and life expectancy of LED bulbs is generally in the region of 50,000 hours to 100,000 hours, which is much greater than that of the earlier bulbs.

Led light bulbs can be utilized as home entertainment lighting, architectural lighting, and they are good for decor. They are also being used inside hospital operating theatres as clinical lighting. The smaller ones produce a high quality light in a range of colors for simply 1 watt of energy usage. Led light bulbs can be bought online, and you will find a vast array of led light bulbs of different models styles and design with 100 % fulfillment guaranteed.

LED light bulbs are solid-state elements, that means that they are tough to break, unlike incandescent lamps which would smash when dropped and the hot-wire breaks. In addition, all fluorescent and halogen bulbs which have glass components can quickly break.

When LED light bulbs were initially presented to the public, they had no particular requirements. The makers utilized to claim that they can work for 100,000 hours with no screening. Nevertheless, when the standards were set, the manufactures declared that they work for 50,000 hours.

These led light bulbs are the best option for power conserving. Good lighting is the most essential part of everyone’s life. Without light you can not work effectively. These led light bulbs are the blessing for you because they work at low power, and offer a very bright light.

Summary

LED light bulbs have actually been established to take the place of incandescent light bulbs or halogen light bulbs because they save energy, their performance is almost double that of typical halogen bulbs and they do not have any dangerous compound such as mercury. The sturdiness and life expectancy of LED bulbs is in the region of 50,000 hours, which is much greater than that of the earlier bulbs. These led light bulbs are the true blessing for you due to the fact that it works at low power and offers really bright light.

You might also like to read:

Problems with LED bulbs and DAB radio – Telegraph.co.uk

Problems with LED bulbs and DAB radio. CFL technology has improved but interference from light bulbs is now back on the agenda, with a vengeance, following the appearance of low cost, energy-saving LED light bulbs, and this just happens to coincide with the growth in popularity of DAB radio.

10 ways you're wasting electricity without realising

Energy sucking appliances are draining your power and boosting your quarterly electricity bill.

http://ladoma.org/energy-saving-light-bu…

4707732870_f105f8dbcc_o

LED Light Bulbs

LED light bulbs come in a variety with each offering their own set of features. The ones from big name brands, such as Phillips and General Electric have the likelihood of being more costly, but could provide more after sales service, consisting of warranty. In reality, the GE ones can be twice as costly, but they do carry a service warranty of at least 10 years, and you can be suer that GE will be around in 10 years time to repay you, whereas other “white label” suppliers may have long-since disappeared! Others might just carry a 2 year warranty, but just cost almost half as much. Just think about it. Don’t you think that GE must be more confident that theirs will last longer than the competitors.

LED light bulbs are primarily comprised of plastic and aluminum, not glass. This suggests they can take the impact from a fall without breaking. Not only that, just think about the safety hazard from broken incandescent bulbs. They are hazardous due to glass fragments, and CFL’s have an added danger, because they contain small amounts of toxic mercury. In contrast, the only thing that could truly harm an LED is direct exposure to high temperature levels (over 100 degrees C), so don’t overheat them! Some lights can also be harmed by wetting with water, so beware and don’t let that happen either.

LED light bulbs are becoming the preferred option for low energy, but highly effective lighting, due to their different bulb alternatives, and the ease which the light output can be varied and managed when compared to CFL bulbs.

Led light bulbs are not manufactured from any harmful chemicals, so you do not need to be afraid about the bulb being liable to burst. Some individuals activate the air conditioning unit to minimize the heat generated through bulbs however par 20 led light bulbs, and were created by scientists thinking about the quick increase in worldwide warming as well.

LED light bulbs are strong state components, which are hard to break, unlike incandescent, fluorescent and halogen bulbs which have internal filaments that can quickly break.

As LED light bulbs are ending up being preferred, they are readily available nearly everywhere. Simply visit a regional very market, and you see wide variety of models and designs in LED light bulbs. They differ in regards to prices and life time. You can easily choose the one which fits your budget and room requirement. You can quickly surf on online establishments and see if you can get some good offers over there if you do not have adequate time.

When LED light bulbs were initially introduced, they had no well defined requirements. The makers used to claim that they can work for 100000 hours without any screening. Nevertheless, when the requirements were set, the produces declared that they work for 50000 hours.

The heatsinks that are constructed into the body of LED light bulbs are very effective at keeping the bulb cool and within its operating temperature variety. Even with a heatsink, LED bulbs installed in such components can over-heat as the heat dissipated by the bulb has no place to go other than into the area very closely around the bulb, so do take some car to allow them some ventilation.

Despite the truth that we seem to be acting as if we are snobs saying the word, LED light bulbs are greatly superior to other kinds of light bulbs. They out perform incandescent and CFL bulbs in numerous various areas such as sturdiness, expected useful lifetime, and just plain effectiveness.

With consideration for the energy policy act of 2007 (EPACT) which produced energy effectiveness standards for incandescent light bulbs (prohibiting a few of the most inefficient) in 2012, residents are set to have to migrate away from old inefficient lighting methods.

LED Light Bulbs For Kitchen Use

The cooking area is a space where lighting has great effect. It is all too easy to make errors in food creation with the wrong lighting, so selecting the best light bulb is crucial. LED light bulbs could most often be the best in this location with their particular zone lighting, but compact fluorescent light bulbs are an exceptional option if you don’t have the small additional budget needed to invest in LEDs.

LED Light Bulbs For Bike Riders

With these items bicycle riders can see well on the roads and with a variety of different LED light bulbs, their exposure can also be improved. LED lights connected to pieces of clothes are usual options in improving security (such as zippers, little headlights, etc). LED torch lights are financial on battery life as they consume really little power.

Why Waste Money On Power For Less Efficient Lighting?

The earlier halogen or incandescent light bulbs utilized to dissipate a big amount of energy by producing heat. This meant that the electricity bill was needlessly high. LED light bulbs have actually been produced after a great deal of research to eliminate the energy lost due to heating, This has led to the production of the most recent ingenious LED bulbs that do not produce any heat and subsequently utilize much less energy to illuminate a space.

GU10 LED bulbs are the most typical replacement LED bulbs. They are comparable to the regular LED bulbs, they have many comparable LED lights placed in one fitting.

Summary

Led bulbs are the best choice for you. Not just that it eats less electrical power, it is also beneficial for environment, unlike other normal bulbs in market. Led light bulbs have actually ended up being a finest alternative for you conserve a lot of money.

The heatsinks that are developed into the body of LED light bulbs are really efficient at keeping the bulb cool and within its operating temperature variety. Even with a heatsink, LED bulbs set up in such components can over heat as the heat dissipated by the bulb has no place to go other than into the area instantly around the bulb. R

Regardless of the fact that we may feel like snobs saying the word, LED light bulbs are greatly remarkable to other kinds of light bulbs. LED light bulbs might really well end up being the finest in this area with their certain zone lighting, however compact fluorescent light bulbs are an excellent option if you don’t have billions to invest on LED technology.

LED light bulbs have been created after a lot of research to get rid of the energy lost due to heating, This has actually resulted in the creation of the newest ingenious LED bulbs that do not produce any heat and subsequently utilize much less energy to light up a room.

Other discussions about this topic:

Problems with LED bulbs and DAB radio – Telegraph.co.uk

Problems with LED bulbs and DAB radio. Technology has improved but interference from light bulbs is now back on the agenda, with a vengeance, following the appearance of low cost, energy-saving LED light bulbs, and this just happens to coincide with the growth in popularity of DAB radio.

Lighting Things Up Differently With LED Technology (StartupMeme?format=xml)

While there is a good chance you have seen these cars racing furiously fast in movies glowing in beautiful and sleek ways. Do I need to mention Fast and the Furious here? This comes from lighting that is changing how we are going to be quite literally seeing the future. LED lights have fast become a viable alternative to traditional lighting. And the technology doesn’t stop there. Aside this remarkable lighting technology being utilized in traditional vehicle bulbs and the underside of cool street cars this state of the art lighting technology is being used in some innovative ways. Now even our display devices are using the same technology.

Although the general feeling is often that alternative lighting is more expensive than standard lights, LEDs have become not only a cheaper method, but they are also superior in many ways. LED lights can now be purchased as a replacement for nearly all traditional screw-in incandescent or compact florescent bulbs and are profoundly more cost effective in many regards.
#### The LED Advantage

The incandescent light bulb, the staple of modern civilization, will cost you in its energy consumption over 5 to 10 times the price of …

LEDs How bright? Can it dim? Will it replace my Airstream …


red panel of LEDs

How to replace dash lights that seem un-replaceable

LED Lighting Market in Japan to Grow at 17.73% CAGR by 2019

DALLAS, Dec. 26, 2014 /PRNewswire-iReach/ — One major trend upcoming in the market is the declining average selling price of LED light bulbs, resulting in their increased adoption in various lighting …

Terms and Conditions | Privacy Policy